HMD Pulse 2T Pro Leak Points to 120Hz OLED and a Rear Dot-Matrix Display

The HMD Pulse 2T Pro has appeared in a new leak suggesting a 120Hz OLED screen, a 6,000mAh battery and an unusual dot-matrix display on the back. The reported specifications also include a 50MP main camera with optical image stabilization and a MediaTek Helio G100 processor.

Despite the similar name, this is a different device from the HMD Pulse 2 Pro previously spotted in a Swiss retailer listing. Both models remain unofficial in the supplied report, so their specifications could change before launch.

HMD Pulse 2T Pro Leaked Specifications

According to the leak, the following hardware is expected:

Reported HMD Pulse 2T Pro specifications — not officially confirmed
Feature	Leaked specification
Display	6.78-inch OLED, FHD+ resolution, 120Hz refresh rate
Processor	MediaTek Helio G100
Memory	8GB RAM and 256GB UFS 2.2 storage
Rear cameras	50MP main camera with OIS and an 8MP secondary camera
Front camera	50MP selfie camera
Battery and charging	6,000mAh battery with 33W wired charging
Software	Android 17
Fingerprint scanner	In-display
Audio	Dual speakers
Protection	IP64 dust and splash resistance
Rear display	Dot-matrix display
Colors	Temper Blue, Titanium and Orbit Green

Rear Dot-Matrix Display Gives the Design a Distinctive Feature

The rear dot-matrix display is the most eye-catching element of the leak. It could help distinguish the Pulse 2T Pro from more conventional smartphones, although the report does not explain its supported functions or customization options.

The leaked color names are Temper Blue, Titanium and Orbit Green. “Titanium” is listed as a finish name and does not establish that the phone uses a titanium frame.

HMD Pulse 2T Pro Leak Reveals OLED and Rear Dot Display

120Hz OLED Screen and Helio G100 Processor

On the front, HMD is reportedly preparing a 6.78-inch OLED panel with FHD+ resolution and a 120Hz refresh rate. The leak also places the fingerprint scanner beneath the display.

Inside, the MediaTek Helio G100 is said to be paired with 8GB of RAM and 256GB of UFS 2.2 storage. No additional memory configurations are identified in the report.

50MP Cameras and a Larger Battery

Main Camera Gets Optical Stabilization

The reported rear setup combines a 50MP main camera with OIS and an 8MP secondary sensor. The latter may be an ultrawide camera, but its role has not been confirmed.

A separate 50MP front camera is listed for selfies and video calls. Camera sensor models and video recording specifications have not been disclosed in the supplied leak.

6,000mAh Battery with 33W Charging

The Pulse 2T Pro is tipped to feature a 6,000mAh battery and support 33W wired charging. That represents a 20% increase in capacity over the battery described for the Pulse 2 Pro.

The capacity increase does not necessarily translate into 20% longer runtime, since the display, processor and software also affect power consumption.

How Is It Different from the HMD Pulse 2 Pro?

The extra “T” matters. Compared with the earlier HMD Pulse 2 Pro retailer listing, the Pulse 2T Pro leak points to several changes:

A slightly larger OLED screen instead of an LCD panel.
A MediaTek Helio G100 processor instead of the Unisoc T615.
More RAM and storage.
A newer software version, with Android 17 listed.
A 20% larger battery.
An additional dot-matrix display on the rear.

These differences make the Pulse 2T Pro appear more extensively equipped on paper, but neither leaked specifications nor a retailer listing substitutes for a final product announcement.